Soil Water Sampler
The soil water sampler allows simple and convenient collection of water samples from within the soil profile. The porous ceramic cup allows water in the soil profile to be drawn into the sampler when a vacuum is applied. The water sample is collected and stored in the 31mm (1.2in) diameter PVC body tube. The sample is then extracted from the sampler and analyzed for the presence and concentration of various chemicals.
|
Part
Number
|
Total
Length
|
Installed
Depth
|
|
|
SPS22531
|
25cm
(10in)
|
15cm
(6in)
|
|
|
SPS24031
|
40cm
(16in)
|
30cm
(12in)
|
|
|
SPS27031
|
70cm
(28in)
|
60cm
(24in)
|
|
|
SPS210031
|
100cm
(39in)
|
90cm
(36in)
|
|
|
SPS213031
|
130cm
(51in)
|
120cm
(48in)
|
|
|
SPS216031
|
160cm (63in)
|
150cm (60in)
|
|
|
SPS219031
|
190cm
(75in)
|
150cm
(72in)
|
|
Note: The total length of the soil water sampler is measured for the centerline of the ceramic cup to the top of the sampler body tube. Approximately 10cm (4in) should protrude above the soil surface in order to allow access for evacuation and sample collection.
The tensionic is a combination tensiometer and soil water sampler. The water inside the tensionic equilibrates with the soil water, reaching ionic as well as a potential equilibrium. This allows concurrent measurement of water potential and water quality with a single instrument.
| Part Number | Total Length | Installed Depth |
| TENS2030 | 30cm (12in) | 15cm (6in) |
| TENS2040 | 40cm (16in) | 30cm (12in) |
| TENS2070 | 70cm (28in) | 60cm (24in) |
Note: The total length of the tensionic is measured from the centerline of the ceramic cup to the top of the sampler body tube. Approximately 15cm (6in) should protrude above the soil surface in order to allow access.
Earth Systems Solutions
Santa Barbara, CA 93111 USA Phone:1+805-967-2726